• Follow us

tempered glass cat eyes 360 degree view of road stud reflective cat eye road reflectors

1.The outer surface of the high-temperature melt-blown metal reflective layer,easy to fall off,can be resistant to tires, sand, solvents, oil friction and corrosion,reflective life of up to 5 years or more.
2.High transparent steel production,load-bearing up to 50T,Strong resistance to rolling.
3.With self-cleaning function,tires rolling, sprinkler, rain will remove the spherical dust,to ensure reflective effect.
4.Due to the material for the tempered glass,in case of rupture, into pieces,will not cause damage to pedestrians and tires.

Description

图片15.png

tempered glass cat eyes 360 degree view of road stud reflective cat eye road reflectors

1. Product Introduction of the tempered glass cat eyes 

360 ° glass cat's eye pitted road signs for safety and environmental protection,low-carbon energy-saving high-tech traffic safety technology products,with high strength,high wear resistance,high brightness,no edges,not fouling and 360 ° regression reflection characteristics,to solve the traditional plastic,aluminum and other reflective film protruding road signs low strength,easy to rupture,easy to frost,easy to fouling,easy to fall off and short life,high maintenance costs,safety performance of the shortcomings of poor,Is a good guarantee of modern transport safety.

Cat's eye as a circular transparent glass body,is divided into a disc-shaped embedded portion and an approximately hemispherical protrusion.The peripheral surface of the buried portion and the reflecting surface formed by the plating of the metal layer on the bottom surface thereof,after the light is refracted by the sphere of the protruding road,reflected by the mirror of the base,and then reflected by the road convex sphere.The thickness of the disc base and the height of the protruding sphere can be adjusted by means of road engineering.

The use of tempered glass technology to its steel,is to put the glass into the high temperature furnace heated to the melting critical temperature,so that the silica molecules re-evenly arranged,and use a uniform high wind pressure,the entire glass is cooled,re-rapid prototyping,to improve its impact hardness.

After the steel is not only the strength of steel than before the increase of 10 times,its rearranged silica molecules in the face of ultra-limited external impact,no more ferocious like a blade,but to the size of the debris for the size of beans,no longer hurt.

With the road marking line color,at this stage the market for products mainly white, yellow two,other special colors Cat's eye can be customized,specifications are spherical Φ 60mm * 25mm (h),spherical Φ60mm * 1900 (h) and so on.

Whether white or yellow cat's eye,are all formed transparent glass spheres,made by high temperature melting,its material is high strength special glass.

Cat's eye disc base of the mirror for the aluminum mirror,fully welded with glass,appearance was rough sand surface,to strengthen and pavement degree and bite degree, increase product stability.


2. Product Parameter(Specification) of the tempered glass cat eyes

Reflective Material

silvering

Diameter

100mm

Spherical Diameter

60mm

Color

Red,Yellow,Green,Blue,White

Height

25+25mm/25+19mm

Weight

560g

Reflective Angle

360°

Compressive Strength

50T

Packing

24 pcs/carton

3. Product Feature And Application of the tempered glass cat eyes

Application:

1. Expressway, national highway, provincial highway, intercity expressway, urban outer ring, viaduct.

2. Expressway entrances and exits, urban road deceleration zone, crosswalk, safe island, bifurcation, culvert and tunnel mouth, up and down the bridge.

3. Scenic areas, ecological protection section.

4. All the main roads, secondary roads, slip roads.

Features:

1. The outer surface of the high-temperature melt-blown metal reflective layer,easy to fall off,can be resistant to tires, sand, solvents, oil friction and corrosion,reflective life of up to 5 years or more.

2. semi-circular convex lens focus,a high concentration of light beam and then reflected,so in the rain, fog, can maintain a full range of condenser reflective effect,and has a 360 ° symmetry and regression reflection without dead features.

3. High transparent steel production,load-bearing up to 50T,

Strong resistance to rolling.

4. With self-cleaning function,tires rolling, sprinkler, rain will remove the spherical dust,to ensure reflective effect.

5. Due to the material for the tempered glass,in case of rupture, into pieces,will not cause damage to pedestrians and tires.

6. Energy saving and environmental protection,beautify environment.Not only to solve the vehicle driving lighting energy conservation issues,but also become a modern road road landscape project another embellishment.

4. Production Details of the tempered glass cat eyes

图片8.png

5.Installation of tempered glass cat eyes

1. Bore a hole with 24mm depth and 100mm dia,and removeresidual asphalt concrete.

2. Inject some of epoxy resin or asphalt mastic when the hole dry enough.

3. Put the glass cat eyes inside the hole and spin,until the epoxy resin or asphalt mastic overbrim.

6.Product Qualification of the tempered glass cat eyes


7.Deliver,Shipping And Serving of the tempered glass cat eyes


8.FAQ

FAQ.jpg

9.Recommendations

1. cat eye reflectors

2. cat eye for roads

3. cat eye reflectors on roads

4. cat eye road reflector

5. cat's eye reflective road stud



Hot Tags: tempered glass cat eyes 360 degree view of road stud reflective cat eye road reflectors, China, manufacturers, suppliers, factory, wholesale, buy, cheap, price
Related Products

Feedback