• Follow us

SWAREFLEX road studs high quality good reflection 43 glass beads aluminum raised pavement marker

1. High pressure load capacity
2. Self-cleaning of special-purpose glass elements by traversing tires
3. Finger-grip on request
4. BSI certified



SWAREFLEX road studs high quality good reflection 43 glass beads aluminum raised pavement marker 


1. Product Introduction of the SWAREFLEX road studs

SWAREFLEX reflectors employ the principle of spherical retro-reflection:if a beam of light hits a retro-reflective optical system,it is reflected back to its point of orgin,irrespective of the direction from which the beam strikes the reflector.

The shape of the glass element is calculated precisely by computer to achieve optimum reflection.The backs of the glass elements are finished with a highly reflective,silvered mirror layer and several special protective layers.

As a reflector is subjected to enormous mechanical stres from vehicles,its surface must be as resistant as possible.Glass is the best material for this type of load.

SWAREFLEX glass elements are embedded in various plastics depending on their application.These plastics with their special charateristics,are perfectly suited to outdoor use.

The combination of glass elements and high-quality plastics produces an eceptionally long product life,and remains unrivaled by other technologies.

International studies have shown that SWAREFLEX road studs are the perfect way for a driver to identify the course of a carriageway in darkness or bad weather conditions.They attract three different human senses since they are visible,can be heard and felt due to the bumpy effect caused by driving over them.When visibility is low,SWAREFLEX road studs give you the best carriageway guidance.85% driving information come from visibility.Visibility influences the reaction time.The better the visibility the faster an obstacle can be recognized.SWAREFLEX reflectors offer optimum visibility.

2. Product Parameter(Specification) of the SWAREFLEX road studs

Article number

Art.No.3543(one way)

Art No.3544(two way)

Boday material

Die-cast aluminum alloy

Reflective panels

43 special glass reflector elements embedded in plastics


Reflective panel in white or yellow plastic with white,yellow,red or green elements



Shank length



370+/-5g(one way) ,372+/-3g (two way)

Compressive strength


Life span

2years for NI-MH battery,5years for lithium battery,8-10 years for super capacitor


Against kerosene and oil(according to standard EN1463-1)

Type of bonding

Recommended by means of two-component adhesive

3. Product Feature And Application of the SWAREFLEX road studs


1.Highway, Villa, Landscape                            

2.Garden, Square, Street, Pathway, 
3.Road Delineation                                            

4.Accident black-spots / cluster sites
5.Hazardous road layouts                                

6.Areas adversely affected by poor visibility


1. High pressure load capacity

2. Self-cleaning of special-purpose glass elements by traversing tires

3. Finger-grip on request

4. BSI certified 

4. Production Details of the SWAREFLEX road studs





5. Installation of the SWAREFLEX road studs

1.Placing security isolation facilities for installation work is most important and must not be ignored. In the whole process of dynamic construction, no matter in an new closed road or a running road, every installers shall be in the isolation area.

If in a running road, the ratio between security personnel and the installing personnel shall be 1:1; If in a closed road, 1:3.  
2.  Locate the installing position and ensure it is flat. For curving, cracked or uneven pavement, straighten it prior to installation. 
3.Clean the installation location with a brush, meanwhile ensure the location is dry. 
4.Glue the road stud thoroughly with proper amount of epoxy glue. 
5.Firmly mount the stud on the fixing location & ensure the reflective part is facing the right traffic direction. Do clean the spilled epoxy glue if excessive amount is used.
6.Inspect the installed studs within 2hrs after installation, ensuring that all the studs are fixed in correct direction or not crooked.
7.Remove the isolation facilities in 4hrs after the stud’s installing glue is thoroughly cured.

6. FAQ

Q1. Can I have a sample order for SWAREFLEX road studs?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time according to the quantity 
Q3. Do you have any MOQ limit for SWAREFLEX road studs ?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for SWAREFLEX road studs?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6: Do you offer guarantee for the SWAREFLEX road studs?
A: Yes, we offer 1 year warranty to our products.

Q7. Is it OK to print my logo on SWAREFLEX road studs?

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q8. How to deal with the faulty?

A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
B:Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.


1. Reflective cat eyes 

2. Reflective studs on roads

3. Reflective studs on motorway

4. Slip road reflective studs

5. Road reflective studs

Hot Tags: SWAREFLEX road studs high quality good reflection 43 glass beads aluminum raised pavement marker, China, manufacturers, suppliers, factory, wholesale, buy, cheap, price