• Follow us

solar led pavement markers with shank CE RoHS IP68 approved aluminum led lane marker

1.Can work more than 3 years normally.
2.CE,RoHS,IP68 approved
3.It can load-bearing 20 tons
4.Saves power, no additional expenses, environmentally friendly, no pollution

Description

图片2.png

solar led pavement markers with shank CE RoHS IP68 approved aluminum led lane marker

1. Product Introduction of the solar led pavement markers with shank

Solar road stud is flashing or steady solar-powered LED maintenance-free lighting devices which used for road construction on edge and middle of road. Embedded in the road surface, they are intelligent devices compared with traditional cat's eyes that they may give drivers more than a thirty-second reaction window compared with about 3 seconds for conventional reflective devices. The intensity of LEDs makes them easily visible at distances over 800m.

It is set along the road pavement,for night or rain and fog,Indicating the direction of road ahead,

By the reverse reflective material, shell, solar panels, LED, control devices,It is active light and passive reflective performance of the visual induction facilities.

The reflex brightness of ordinary reflective road stud is only 300-400 MCD,but the luminous brightness of solar spike up to 2000 MCD above,it is 6-7 times the former.High-intensity light can go through rain and rain at night,Safe and effective for the driver to guide the direction.

The solar road stud flashing at some frequency in the evening,and human vision is more sensitive to change,So its dynamic warning role is very strong.Active lighting can not only avoid the maximum rain and rain interference,And can be out of dependence on the car lights,Visual distance farther,better results.Solar road stud in the rain and fog weather and in the corners at the outline of the road,Induce driver's attention And thus eliminate the security risks played a very important role.

图片3.png

2. Product Parameter(Specification) of the solar led pavement markers with shank

Body material

Aluminium alloy

Power supply

Solar panel(monocrystalline 2.5V/150MA for NI-MH battery;5V/60MA for lithum battery)

Battery

NI-MH 1.2V/600MAH, Lithium battery or Super capacitor(120F)

LED

Ultra bright diameter 5mm;  4 or 6pcs(double side)

LED color

Red,Yellow,Green,Blue,White

Working mode

Blinking or constant(flashing frequency 2Hz, also can be made according to your requirements)

Visual distance

>800m

Working hours

Fully charge at 8hours and can working 120hours continuously

Water proof

IP68

Life span

2years for NI-MH battery,5years for lithium battery,8-10 years for super capacitor

Load capacity

>20T

Size

L123mm*W133mm*H22+55mm

3. Product Feature And Application of the solar led pavement markers with shank

Application:

1.Highway, Villa, Landscape                            

2.Garden, Square, Street, Pathway, 
3.Road Delineation                                            

4.Accident black-spots / cluster sites
5.Hazardous road layouts                                

6.Areas adversely affected by poor visibility

 图片4.png

Features:

1.Easy installation, no maintenance
2.Saves power, no additional expenses, environmentally friendly, no pollution
3.Can work more than 3 years normally
4.Solar energy-based power source
5.Brightness sensitive auto-switch, automatically turns on at night and turns off at dawn
6.It can load-bearing 20 tons
7.Waterproof and unbreakable: Solar panel, electronics and optics are fitted inside

4. Production Details of the solar led pavement markers with shank


5. Installation of the solar led pavement markers with shank

1.Before installation, solar road studs shall be charged under sunlight for 1 hr, to check the studs can work normally.
2. Placing security isolation facilities for installation work is most important and must not be ignored. In the whole process of dynamic construction, no matter in an new closed road or a running road, every installers shall be in the isolation area.

If in a running road, the ratio between security personnel and the installing personnel shall be 1:1; If in a closed road, 1:3.  
3. Locate the installing position and ensure it is flat. For curving, cracked or uneven pavement, straighten it prior to installation. 
4. Clean the installation location with a brush, meanwhile ensure the location is dry. 
5. Glue the road stud thoroughly with proper amount of epoxy glue. 
6.  Firmly mount the stud on the fixing location & ensure the reflective part is facing the right traffic direction. Do clean the spilled epoxy glue if excessive amount is used.
7. Inspect the installed studs within 2hrs after installation, ensuring that all the studs are fixed in correct direction or not crooked.
8. Remove the isolation facilities in 4hrs after the stud’s installing glue is thoroughly cured.

图片8.png

图片9.png

6. Product Qualification of the solar led pavement markers with shank


图片3.jpg图片2.jpg图片4.jpg



图片13.png

图片15.png


7. FAQ

FAQ.jpg

8.Recommendations

1. raised pavement markers

2. reflective pavement markers

3. reflective raised pavement markers

4. led pavement markers

5. solar pavement markers


Hot Tags: solar led pavement markers with shank CE RoHS IP68 approved aluminum led lane marker, China, manufacturers, suppliers, factory, wholesale, buy, cheap, price
Related Products

Feedback