• Follow us
Home > Knowledge > Content
Roadway solar aluminum road stud
Jun 21, 2018

Roadway solar aluminum road stud

Roadway solar aluminum road stud with over 38T resistance in static.10MM thickness PC and fully epoxy glue inside.Stainless steel screw fixing and silicon glue sealed for waterproof with IP68.We use high efficiency monocrystalline.

Shell is silver coating aluminum casting.There are 6 pcs Dia 10mm high brightness LED.Visual Distance more than 1000meters.High-temperature resistance battery and circuit,can be used on the equator.


aluminum road studs.jpg

Solar Panel2.5V/220MA mono-crystalline
Storage Components1.2V/1200MAH High temperature NI-MH Battery
Working Time100h after fully charged 
Work modeFlashed for 120times per minute or Stable
LED ColorRed,Yellow,Blue,Green,White 
LED Qty3PCS Diameter 10mm High Brightness LED per side 
Visual Distance>1000meters
Life Span3-5Years 
Work Temperature-20℃~+80℃
MaterialAnti-UV PC+silver coating Aluminum casing
Protect LevelIP68,Can work under water
Weight820g
Weight Resistance in static>38 Tons
Products SizeDiamter 125mm,Height 50mm
PackageCarton size 40*28*25.5CM,24pcs per carton,G.W.:21kg

solar cat eyes.jpg

solar cat eye.jpg

Installation Procedure 


1.Close the road 

2.Check if the solar stud charges and discharges normally     

3.Identify the place for installation     

4.Dig the hole for solar road studs     

5.Inject the epoxy glue into the hole and place the solar road studs into the hole 

6.Fix the wing with screws to ensure the solar road studs and the ground in the same level.     

7.Wait 8 hours for glue drying before open the road    


If you have interest in our Roadway solar aluminum road stud,please give us an inquiry,or you can send an email directly to info@xaliongroup.com ,add my skype:julia211318,WhatsApp:0086-15829228597,we will do our best to serve you!