• Follow us
Home > Knowledge > Content
HOT HOT HOT NEW DESIGNED ULTRA THIN SOLAR ROAD STUD
Dec 29, 2017

HOT HOT HOT NEW DESIGNED ULTRA THIN SOLAR ROAD STUD

1.What is solar road stud?


Solar road stud is one kind of road studs,set along the road surface,for night or rain and fog weather,indicate the way forward,by the retro-reflective material, shell, solar panels, LED, control devices,vision-inducing facilities with active and passive reflective properties,usually used in conjunction with the mark line.


After research and develop in the market and feedback from clients for several months,we launch a new type of solar road stud,it is ultra thin type,the resistance can reach 20T.We use lithium battery(5 years lifespan) or super capacitor(10 years lifespan).There will be big advantage in the market,we trust we can get recognition in the market.


solar road studs.jpg


2.Parameters of solar road stud


Material

PC

Power supply

High Efficient Solar Panel (5V/80MAH )

Battery

Lithium Battery (3.2V/300MAH)

LED

Ultra bright diameter 5mm(6pcs )

LED color

Red,Yellow,Green,Blue,White

Working model

Blinking or constant(charged at daytime, working automatically at night)

Working hours

140hours for blinking and 40hours for constant after fully charged

Size

L114*W90*H11mm

Visual distance

>800m

Water proof

IP68

Resistance

>20T

Life span

5years for Lithium battery)

10years for 120F super capacitor


3.Product show of solar road stud


ultra thin solar road stud.jpg

ultra thin road stud.jpg


4.Installation of solar road stud


1--confirm the installation location :

Firstly using a ruler to determine the installation location,to ensure that the location of the vertical in a straight Line,the installation distance according to the design requirements,the installation ground need to be flat ,dry,clean,seamless.

2--glue mixing:A glue and B glue ratio is 1:1

(for example:A glue1.0kg,B glue 1kg), then add 20%-30% cement as loading filler,the glue must be evenly mixed ,all to be the uniform color.

3--install the road stud with the mixed glue

The road surface need to be cleaned up during installation,using the proper quantity glue,both sticked firmly on the ground and not overflow from the road face,about 40g glue for one road stud ,paint the glue below of the road stud and stick it on the road surface,after sticked please turn the road stud left and right once , to paste evenly the ground and the road stud.

4--inspection

Look over and check the installed road stud after installation for 2 hours,if any contorted ,need to be reversed.

5--road closures

Road closures need to be over 6 hours to ensure the glue curing time.


5.Other types of solar road stud


aluminum solar road stud.jpg

aluminum road stud.jpg

solar road stud.jpg


6.Certificates of solar road stud


solar road stud certificates.jpg


If you have interest in them,you can contact us by info@xaliongroup.com,skype:julia211318 at any time.We serve for 24 hours/7 days.We will show professional knowledge and technology to you!